mcse braindumps mcse study guides ccna braindumps ccna study guides

www.monsterdump.com

mcse braindumps submitted by users like you.

www.monsterdump.com	Back \| Rate me \| Report Error
Submitted By: boania@earthlink.net Date Added: 1/3/2003 Word Count: 638 Views: 5482 Rating: after 8 vote(s)

I passed 924/1000. I use TestOut Software and www.monsterdump.com braindumps.
good luck

1. Lab, three switches/routers two are configured you need to configure one switch with Password = gold, console =silver, telnet =graphite, the privilege password needs to be encrypted

use the enable secret password
use line console 0, login, password
use line vty 0 4, login, password
copy run start

2. Lab, three routers east, west, and central. They worked now there not working east and central do not work. Analyze what is wrong. Ip-address is wrong on router east for the serial 0

Int serial0
ip address 192.23.120.1 255.255.255.0
no shutdown
copy run start

3. What spans the OSI layer 7 model completely (choose 3)

a. network host
b. network management station Y
c. hub
d. switch
e. web server Y
f. router Y
g. transreciever

4. Which of the following are true regarding bridges and switches (choose three)

a. switches are primary software based while bridges are hardware based

b. both bridges and switches forward layer 2 broadcasts Y

c. bridges are frequently faster than switches

d. switches have a higher number of ports than bridges Y

e. bridges define broadcast domains while switches define collision domains

f. both bridges and switches map forward decisions on layer 2 address Y

5. Which of the following characteristic of layer 2 ethernet switches (choose two)

a. establish a single collision domain

b. establish multiple collision domains Y

c. build dynamic mac address mapping tables Y

d. maintain a routine table

e. forward unicast frames only

6. Which command displays RIP routing update as they are sent & received on a router (choose one)

a. show ip protocols

b. show ip route rip

c. debug ip rip Y

d. debug ip update

e. debug ip transaction

7. Which command is used to display the placement & direction of an IP Address control list on a router

a. show access list Y

b. show ip router

c. show ip interface

d. show interface list

e. show ip interface brief

8. Which of the following are true regarding full duplex Ethernet when compared to half duplex Ethernet (choose two)

a. FDE consists of a shared broadcast domain while HDE consist of Private broadcast domain

b. FDE is collision free while HDE is subject to collision Y

c. FDE provide higher throughput that HDE on same bandwith Y

d. FDE provides lower throughput than HDE on the same bandwith

e. FDE consists of shared cable segment while HDE provides point to point throughput.

9. A routing table contains static, rip, igrp routes for the same destination which route would normally be used to forward data.

a. igrp route

b. static route Y

c. rip route

d. all three will load balance

10. You need to add a new vlan named accounts to your switched, network which is the following is true regarding the configuration of the vlan

a. vlan must be created Y

b. vlan must be named Y

c. ip address must be configured for account vlan

d. the desired port must be added to vlan Y

e. the vlan must be added to the STP domain

11. Which of these is the Hybrid protocol?

a. rip

b. eigrp Y

c. igrp

d. ospf

12. Which command is used to connect a DCE to a DCE?

a. serial up

b. clockrate 56000

c. clock rate 56000 Y

13. IPX Network & mac network hosts

Network IPX first, then Ethernet card host address

14. 2 Cabling questions, Connect Ethernet Switch to Ethernet Switch & Connect Router to Router

15. 136.245.66.1 [100/1200] 255.255.255.0 what are the default settings for the protocol

a. delay Y

b. hop count

c. bandwith Y

d. ticks

15. which of the following will ping a

a. Router> ping 123.120.0.0

b. Router> 192.23.120.0

c. Router# 123.133.23.10 Y

Contact Us | About Us | Advertise | Disclaimer | Policys and Rules

The information found on this site is not sponsored by, endorsed by or affiliated with Microsoft, Inc.® ,Windows, Windows 95, Windows98, WindowsME, WindowsNT4.0, Windows2000, and WindowsXP, CompTIA®, Transcender®Inc., Cisco Systems, Inc., Cisco®, Cisco Systems®, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™, CCSI. The Microsoft logo and Microsoft Certified Professional logos are trademarks or registered trademarks of Microsoft Inc. Cisco Systems logo and the CCNA logo are trademarks or registered trademarks of Cisco Systems, Inc. in the United States and certain other countries. All other trademarks are trademarks of their respective owners.

If there is any copyrighted material EVER found on this site. Please contact us immediately at Webmaster
Website Design and hosting by aNAMEless.com - Free Web Templates - Free Templates