hi every body,
i passed my exams in May some very good people say its a luck
but tis not like taht u just put your affort hard
1.You have two processes running on your computer--P1 and P2. You noticed that when you run both of them, P2 always times out, while when you pause/stop P1, P2 runs fine. P1 runs with "real time" priority and uses 12 threads; P2 runs with "normal" priority" and uses 1 thread. What should you do ?
ans;Decrease the number of threads for P1;
2.You use two modems for a RAS connection, but when you actually dial-in into the server,
Enable Multilink on the RAS server;
3.You need to copy a 2MB bitmap, compressed to 1MB. You are trying to copy it to a floppy disk, but eventually get an error message "Insufficient disk space." What shall you do ?
4>You are an administrator in a company that has Windows 2000 professional systems. Your users have been installing unsupported USB drivers on to their systems causing them to lock up and fail.
You want to insure that only drivers that are in the HAL can be installed. What must be done? (Choose 2)
A. Ignore – Install all files, regardless of file signature
B. Warn – Display a message before installing an unsigned file
C. Block – Prevent installation of unsigned files
D. Apply setting as system default
Ans. C, D
5.You are performing a Weekly backup and you want to be sure that you backup everything including the registry, boot files, and COM
A. Configure the backup to backup the system state area
B. Configure the backup to backup the system partition
C. Create a batch file to run RDISK.EXE /s-before backup starts
D. Create a batch file to run RDISK.EXE /s- after backup is started
Ans. A.–
6.You install a ZIP drive into a Windows 2000 system. You install the drivers. On reboot the system locks. You can’t get in, and even safe mode doesn’t work. How do you unload the driver to get back in to Windows 2000 professional? (Choose three)
A. Go into device manager and remove Zip drive.
B. From a command prompt run LISTSVC to disable the zip driver
C. From a command prompt, run DISABLE to disable the zip driver
D. Select recovery console from the repair
E. Start the PC from CD-ROM
Ans. C, D.E
7. On a Windows 2000 professional system you set up a scheduled task to run. It does not run when expected. You log in and run the task, it works. What should you do to insure that it works in the future?
A. Schedule the task to run in the same security context as you
B. Schedule the task to be logged on as an administrator
C. Delete the task and start over
Ans A –
8.Maria has been set up as an assistant to you the administrator. Users are complaining that Maria has been opening their files and editing them.
She needs to perform backups and installations of programs, and setting up of printers.
How do you fix the problem with the minimum amount of effort, yet allowing her to accomplish the assigned tasks?
A. Remove her Administrator privilege and give her Power Users and Backup Operators
B. Leave her as Administrator and make deny on Users’ files
Answer: A
9. you’re running Windows 2000 professional. You set up a color LaserJet printer on computer1, you name it printer 2. You have the same color laser jet on computer2; you name this one printer 2. The laser jet on computer1 fails. You want to send the three print jobs to the printer on computer2 that are in the computer1 queue. You do not want to have users to re-send these jobs to the printer. How can you accomplish this?
A. Select a second printer port on the printer in computer1 redirect the port to \\computer2\printer2
B. Physically haul a 120lb printer over to computer1
C. Stop and restart the service
Answer: A
10.Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do?
A. Can’t be done.
B. You need to put Windows 2000 on a separate partition from Windows NT 4.0
C. You need to upgrade Windows NT 4.0 to SP4.
Answer C
11.Bob is going on a trip with his laptop configured with Windows 2000 professional. He is concerned that he will run out of battery life and his system will crash. He asks you to configure the power savings feature so that when he is not using his laptop, it will save his work and power down. You go into APM options. What should you do next?
ans;Set the system to hibernation mode to 15 minutes
12.You are upgrading two windows NT4 computers to Windows 2000. Computer 1 completes the upgrade with no problems. During the upgrade of computer 2, you experience a power loss and cannot boot into NT4. You want to use Computer 1 to help Computer 2 recover. How can this be done?
A. Do an across the network install
B. Run MAKEBT32.EXE to make diskettes to start your machine.2
C. Copy the boot files from computer 1 to a floppy, boot to the floppy and continue the setup of computer2.
ans;b
13.You have a system with two monitors, both set for 16-bit color and 1024 X 768 resolution. You decide to set up a DOS application in a DOS Virtual Machine Window. Default DOS configuration is in effect (Default autoexec.nt and config.nt) and the default DOS .PIF file is present. You place the shortcut on the first monitor screen. When you open it the screen goes to scrambled. You move the shortcut to monitor #2 and launching the app locks. What do you need to do?
A. Change both monitors to 256 colors. Configure the application to run full screen
B. Change both monitors to run and optima settings. Configure the application to run full screen
C. Update the drivers for Video card #1 Change #2 to 640 X 480
D. Do something else
ans;a
14. You are trying to install a plug-and-play printer. During the completion of the install, the following error pops up Plug-n-play printer error 00000007E-293 WINPRINT.DLL modules not found. What can you do?
A. Install a WDM compliant driver
14.You are using Windows 2000 professional at home with a smart card installed, You want to connect to you RAS server to pick up e-mail. What protocol will you need?
A. EAP
B. PPTP
C. IPSec
D. NETBEUI
Answer: A
16.you are an administrator that has just received in 100 PC’s with Windows 98 on them. They also have Dual 500Mhz processors on them. You decide that you want to upgrade them all up to Windows 2000 Professional. After running set up on a machine, you realize that only one of the processors is being seen by the OS what do you do next.
A. Run sysprep.exe update the machines after deployment
B. Run sysprep.exe with -pnp option
C. On the test machine update use device manager to update the system to recognize the second processor. Then run sysprep.exe.
Answer: C
17.You are the administrators of your company's network. Your network
has 75 windows 2000 professional computers and 8 Windows 2000
Server computers. Users on the network drive save their work files
in home folders on a network server. The NTFS partition that contains
the home folders has Encrypting File System (EFS) enabled. The partition
also has disk quotas defined. A user named candy reports that she cannot
save any files to her home folder. She also cannot update files in her
home folder. When she attempts to save files to the folder she receives
the following error message insufficient disk space. Other users are
not experiencing this problem with their home folders. You want to enable
candy to save files in her home folder. What should you do?
A. Log on to the network as a Recovery Agent. Decrypt all of candy's files in her home folder.
B. Log on to the network by using the domain Administrator account. Grant Candy Full control permission to her home folder.
C. Use Windows Backup to archive and remove old files on the server.
D. Increase the server a disk quota entry for candy to accommodate
the additional files
Ans. D.
18; You are using a dialup connection. You want to insure that your password is encrypted. What protocols from the list below would you disable?
A. PAP
B. SPAP
C. MSCHAP
D. MSCHAP V2
E. For MS based CHAP Protocols
Ans. A,(this que is exibit type of que. u just uncheck pap box
19; You install Windows 2000 professional on your computer at home. You create a new dial-up connection to connect to your company's remote access
server. You configure the connection to use both of your external modems
and to use multilink to bind the modems together.
You start the dial-up connection and connect to the remote access server.
You notice that only one of the modems is connected to the remote access
server. What should you do?
A Configure the dial-up connection to use a SLIP connection
B Configure the company's remote access server to accept multilink
connections
C Replace your modems with new modems that support multilink
D Grant your user account multilink permission on the company's remote access.
Ans. B
20;You are upgrading 50 Win98 computers to Win2kPro. They all have the exact same hardware and are PXE compliant. The first 10 computers install correctly. How do you install Win2kPro to the rest?
A. Change BIOS settings
B. Add more IP addresses in the DHCP server
C. Make startup disks using RBFG.EXE
ans:b
21;You have a 2 MB Windows Bit Map. You have compression enabled on Drive C:. The file has been compressed to 1 MB. You try to copy the file to a floppy disk but you get the message "insufficient disk space." How can you copy the file to the disk?
Ans. Compress the bitmap with a 3rd party compression tool then transfer it to the “a” drive.
22: You want to upgrade 150 computers from wks4 to 2000 pro. You create a unattent.txt file by using setup manager. You copy the file to a floppy disk. You then start the installation on a test computer by using the windows 2000 professional CD-ROM. You insert the floppy disk after the computer starts. Although you had set the user interaction level to full unattended mode, u are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input. What should you do?
a. Add a {data} section to aunattend.txt, and set the unattended install Parameter to YES.
b. Add an {Un-attend} section to unattend.txt, and set the OEMP reinstall parameter to Yes.
c. Rename unattend.txt on the floppy disk to winnt.sif
d. Create a \$oem$\$1 folder on the hard disk of the test computer, and copy unattend.txt to the folder.
ans;c(ref;mark minasi-unattrnd u\installation part)
23;You are the administrator of your company’s network. A user named Peter runs windows 2000 Professional on his portable computer. Peter wants to be able to work at home on files that were created in the office on the company network. Prior to logging off the network and leaving the office, Peter enables offline files. Peter calls you from home and reports that copies of his folders and files on the network are not available on his portable computer. What should you instruct peter to do?
a. Enable file and print sharing. Peter will be able to access his files at home immediately.
b. Synchronize all offline files. Peter will be able to access his files at home immediately.
c. At the office, make all files available offline. Peter will be able to access his files the next time he logs off the network.
d. At the office, create a shortcut to the Offline Files folder. Peter will be able to access his files the next time he logs off the network.
Ans C(100% not sure)as is instucted that user already enabled offline file then after he faced problem9at home)
24.your windows 2000 professional computer has 10-shared folders that are available to other network users. A user reports that he cannot access a shared folder named share A. You want to respond to the user’s problem as quickly as possible by using an administrative tool. However, you cannot remember the server location of Share A. What should you do?
a. Use windows explorer to display the file paths of your shared folders.
b. Use store it in computer management to view local drive properties.
c. Use event viewer in computer management to search for shared folder error messages.
d. Use System tools in computer management to display the file paths of your shared folders.
Ans d
25.You are using windows installer to deploy an application to 750 windows 2000 Professional computers on your network. The network includes an organizational unit (OU) named sales. A Group Policy object (GPO) is created for the Sales OU. The software deployment of the application is unsuccessful. During the deployment, some users in the Sales OU report that the installation is aborting with random errors midway through the installation process. The remaining users in the Sales OU report that the software is installing, but is giving them general protection fault errors. What should you do?
a. Repackage and re-deploy the application’s .msi file to the Sales OU.
b. Repackage and re-deploy the application’s .mst file to the Sales OU.
c. Re-deploy the application by using the Group Policy object (GPO for the Sales OU.
d. Restart Windows Installer on all computers in the Sales OU. Then re-deploy the application’s .zap file to the sales OU.
Ans. B.
26.You are having problems with video during an unattended installation, the screen flickers and blanks out. Place the cross hairs on the line where the problem exists in your unattended.txt file.
() The answer was either BitsperPel or Vrefresh) Read what normal settings should be for each of those using a 640-480 resolution. Make sure you know which one 640 and which is 480
[Display]
BitsPerPel = 8
Vrefresh = 80
Xresolution = 640
Yresolution = 480
this one is also a exibit type of question.u just click on the sceen of unatedn file exitbit
and just click on the wrong which u think is wrong .
ans; is increase your refresh rate.so i think it right ans.
27. someone is deleting files and you wish to find out who it is. (Select 2)
A. Enable local group policy object access
B. Select files to audit using explorer
Ans. A, B( there are six or seven check boxes.
28; Kristin works between 2 offices. From her laptop, she logs into her Boston account using her login “Bost_Eng”. She only has the English version available. When Kristin logs into her Mexico account “Mex_Span”, she only has Spanish language available. Kristin logs in to the Bost_Eng account and needs to use Spanish. She tries to install Spanish but is not able to. You are the network administrator, how to address this problem so that Kristen can use English and Spanish from her Bost_Eng account?
Ansp;B. Giver her appropriate permissions to allow her to install the Spanish language option.
29;You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should u do?
a. Run rbfg.exe before installing the standard applications.
b. Run riprep.exe before installing the standard applications.
c. Copy the all users profile to the default users profile.
d. Copy the local administrator account profile to the default users profile
Ans. C
30;You are upgrading a computer from windows98 to windows 20000 professional. The computer is a 400-Mhz Pentium III, and has 128 MB of RAM and a 10-GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the text mode installation portion is complete, You restart the computer. The BIOS virus checker on your computer indicates that your computer is infected with a Master Boot Record virus. What should you do before u continue the installation?
a. Remove the virus checker in windows 98.
b. Disable the BIOS virus checker and restart the computer.
c. Run Fixmbr.Exe from the Windows 20000 Professional CD-ROM.
d. Modify the Boot.ini from to include a signature) parameter on the ARC path of the system partition.
Ans B
31; You run the English (US) edition of windows 2000 professional on your computer. You are developing a product installation document that has text in both English and Spanish. The word processing program you are using is a Windows 16-bit character-based application. You start the word processing program and complete the English Portion of the document. You then install Spanish as a language group by using Regional Options in Control Panel. However, You cannot use Spanish to complete the Spanish portion of your document. What should you do?
a. Change the language preference from English to Spanish within the word processing Program.
b. Install the Spanish version of Windows 2000 Professional . Reconfigure your language settings, and restart the word processing program.
c. Save and close the word processing program. Select Spanish by using the locate indicator on the taskbar, and restart the word processing program.
d. Save and close the word program. Log off and log on to the computer.
Restart the Word processing program, and select Spanish by using the locale indicator on the taskbar.
this my exeperince in my exam; this exam is not very hard if you prepared hard;
i am very thankful to 'mark minasi' -complete ref.mastering in win-2000 ser and professional
and i advise u that donn't rely on dumps ans u just check your self and get prepare for exam
1. You the administrator logs onto a Windows 2000 professional computer, which is used by different students. User1 is not an administrator. You like to use this account instead of logging on as administrator for security reasons. You want to schedule a task to run a command called ADDUSERS.CMD to add six new users. What do you need to do?
a. Schedule the task to run under and administrator account
b. Log on as Administrator and schedule to run under USER1
c. Take Ownership of ADDUSERS.CMD
2. You are an administrator in a company that has Windows 2000 professional systems. Your users have been installing unsupported USB drivers on to their systems causing them to lock up and fail.
You want to insure that only drivers that are in the HAL can be installed. What must be done? (Choose 2)
A. Ignore – Install all files, regardless of file signature
B. Warn – Display a message before installing an unsigned file
C. Block – Prevent installation of unsigned files
D. Apply setting as system default
3. You are performing a Weekly backup and you want to be sure that you backup everything including the registry, boot files, and COM
A. Configure the backup to backup the system state area
B. Configure the backup to backup the system partition
C. Create a batch file to run RDISK.EXE /s-before backup starts
D. Create a batch file to run RDISK.EXE /s- after backup is started
4. You install a ZIP drive into a Windows 2000 system. You install the drivers. On reboot the system locks. You can’t get in, and even safe mode doesn’t work. How do you unload the driver to get back in to Windows 2000 professional? (Choose three)
A. Go into device manager and remove Zip drive.
B. From a command prompt run LISTSVC to disable the zip driver
C. From a command prompt run DISABLE to disable the zip driver
D. Select recovery console from the repair
E. Start the PC from CD-ROM
5. You need to share a financial spreadsheet with other employees of your company. The material is of a sensitive nature and you want to prevent the ability of users to use offline caching. How do you do this?
A. Assign Special Permissions
B. Select Shared folder properties, caching, deselect “Allow Caching”
6. On a Windows 2000 professional system you set up a scheduled task to run. It does not run when expected. You log in and run the task, it works. What should you do to insure that it works in the future?
A. Schedule the task to run in the same security context as you
B. Schedule the task to be logged on as an administrator
C. Delete the task and start over
7. You install an ISA sound card into your Windows 2000 Professional system. The card fails. You reboot and go into safe mode. What do you do?
A. Enable driver-signing
B. Disable driver-signing
C. Disable driver
D. Disable using computer management
8. Maria has been set up as an assistant to you the administrator. Users are complaining that Maria has been opening their files and editing them.
She needs to perform backups and installations of programs, and setting up of printers.
How do you fix the problem with the minimum amount of effort, yet allowing her to accomplish the assigned tasks?
A. Remove her Administrator privilege and give her Power Users and Backup Operators
B. Leave her as Administrator and make deny on Users’ files
9. You work for an accounting firm. Currently all developers are running Windows 98. The company wants to go to Windows 2000 Professional. Programmers are going to need to code in both a Windows 98 environment and a Windows 2000 environment. What platform can you install that will optimize the availability of code to both environments?
A. FAT16
B. FAT32
C. NTFS
D. HPFS
10. You’re running Windows 2000 professional. You set up a color laserjet printer on computer1, you name it printer 2. You have the same color laserjet on computer2, you name this one printer 2. The laserjet on computer1 fails. You want to send the three print jobs to the printer on computer2 that are in the computer1 queue. You do not want to have users to re-send these jobs to the printer. How can you accomplish this?
A. Select a second printer port on the printer in computer1 redirect the port to \\computer2\printer2
B. Physically haul a 120lb printer over to computer1
C. Stop and restart the service
11. How can you quickly find out the full path descriptions to all of your shares?
A. Windows explorer
B. Use storage in the computer management tool
C. Event Viewer in the computer management tool
D. System tools in the computer management tool
12. Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do?
A. Can’t be done.
B. You need to put Windows 2000 on a separate partition from Windows NT 4.0
C. You need to upgrade Windows NT 4.0 to SP4.
13. You have a system with two monitors, both set for 16-bit color and 1024 X 768 resolution. You decide to set up a DOS application in a DOS Virtual Machine Window. Default DOS configuration is in effect (Default autoexec.nt and config.nt) and the default DOS .PIF file is present. You place the shortcut on the first monitor screen. When you open it the screen goes to scrambled. You move the shortcut to monitor #2 and launching the app locks. What do you need to do?
A. Change both monitors to 256 colors. Configure the application to run full screen
B. Change both monitors to run and optima settings. Configure the application to run full screen
C. Update the drivers for Video card #1 Change #2 to 640 X 480
D. Do something else
14. You are trying to install a plug-and-play printer. During the completion of the install, the following error pops up Plug-n-play printer error 00000007E-293 WINPRINT.DLL modules not found. What can you do?
A. Install a WDM compliant driver
15. Bob is going on a trip with his laptop configured with Windows 2000 professional. He is concerned that he will run out of battery life and his system will crash. He asks you to configure the power savings feature so that when he is not using his laptop, it will save his work and power down. You go into APM options. What should you do next?
A. Set the system to hibernation mode to 15 minutes
B. Set the system to snooze mode after 15 minutes.
16. You are upgrading two windows NT4 computers to Windows 2000. Computer 1 completes the upgrade with no problems. During the upgrade of computer 2, you experience a power loss and cannot boot into NT4. You want to use Computer 1 to help Computer 2 recover. How can this be done?
A. Do an across the network install
B. Run MAKEBT32.EXE to make diskettes to start your machine.
C. Copy the boot files from computer 1 to a floppy, boot to the floppy and continue the setup of computer2.
17. You have ten computers in your organization that are not connected to the Internet. The company breaks down and purchases a 56K modem to connect to the Internet. You implement Internet connectivity sharing. Now you can’t see any of the other computers on your network. What do you do?
A. Disable Internet Connection Sharing.
B. Use IPCONFIG to release and to renew
18. You are using Windows 2000 professional at home with a smart card installed, You want to connect to you RAS server to pick up e-mail. What protocol will you need?
A. EAP
B. PPTP
C. IPSec
D. NETBEUI
19. You are deploying an application using windows 2000 (Windows 2000 Service pack). When Users try to install it the installation fails. What do you need to do in order correct the situation?
A. Re-deploy the .msi file
B. Re-deploy the .mst file
C. Re-deploy using the .zap file
20. You are an administrator that has just received in 100 PC’s with Windows 98 on them. They also have Dual 500Mhz processors on them. You decide that you want to upgrade them all up to Windows 2000 Professional. After running set up on a machine you realize that only one of the processors is being seen by the OS what do you do next?
A. Run sysprep.exe update the machines after deployment
B. Run sysprep.exe with -pnp option
C. On the test machine update use device manager to update the system to recognize the second processor. Then run sysprep.exe.
21. TCP/IP diagram question:
4 PC’s on one side of the router. 3 configured with TCP/IP and NWLink 802.2 and fourth PC with NWLink 802.2. Their gateway configuration is wrong
the other side is all TCP/IP configured correctly to the router. What are the two best things to get them all talking together?
A. The DHCP server was handing out bad gateway addresses
B. Configure the Nwlink PC to use DHCP
C. Configure the Nwlink PC to use 802.2
D. Configure everyone to use NETBEUI
22. Sandy has a Windows 2000 Professional system. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from any computer she logs in at. What can you do to insure that she has this ability?
A. Create a roaming profile
23. You want to remove the logoff option from your screen. What TWO places can you do this from?
A. Local Policy
B. Group policy
24. You are the administrators of your company's network. Your network
has 75 windows 2000 professional computers and eight Windows 2000
Server computers. Users on the network drive save their work files
in home folders on a network server. The NTFS partition that contains
the home folders has Encrypting File System(EFS) enabled. The partition
also has disk quotas defined. A user named candy reports that she cannot
save any files to her home folder. She also cannot update files in her
home folder. When she attempts to save files to the folder she receives
the following error message insufficient disk space. Other users are
not experiencing this problem with their home folders. You want to enable
candy to save files in her home folder. What should you do?
A. Log on to the network as a Recovery Agent. Decrypt all of candy's files in her home folder.
B. Log on to the network by using the domain Administrator account. Grant Candy Full control permission to her home folder.
C. Use Windows Backup to archive and remove old files on the server.
D. Increase the server a disk quota entry for candy to accommodate
the additional files
25. You are the administrator of your computer's network. Your company is
based in Russia and conducts the majority of its business in Russian.
Users in your company create, view, and edit documents in English(US),
French and Spanish to communicate with vendors internationally
users run the Russian localized edition of windows 2000 professional
on their desktop and portable computer. A user named Katrin wants to
create a word processing document in both English and Spanish by using
Notepad in windows 2000 professional. She requests your assistance
in enabling English and Spanish on her computer. What should you do?
A Instruct Katrin to select the desired input locale for either
English or Spanish within Notepad.
B Instruct Katrin to select the input locale indicator on the
taskbar and select either English or Spanish
C Instruct Katrin to use Regional Options in Control Panel to
add input locales and keyboard layouts/IME for both English and
Spanish.
D Create a local computer policy for Katrin's computer to include
both English and Spanish.
26. You install Windows 2000 professional on your computer at home. You create
a new dial-up connection to connect to your company's remote access
server. You configure the connection to use both of your external modems
and to use multilink to bind the modems together.
You start the dial-up connection and connect to the remote access server.
You notice that only one of the modems is connected to the remote access
server. What should you do?
A Configure the dial-up connection to use a SLIP connection
B Configure the company's remote access server to accept multilink
connections
C Replace your modems with new modems that support multilink
D Grant your user account multilink permission on the company's remote access.
27. You are using a dialup connection. You want to insure that your password is encrypted. What protocols from the list below would you disable?
A. PAP
B. SPAP
C. MSCHAP
D. MSCHAP V2
E. For MS based CHAP Protocols
28. You are upgrading 50 Win98 computers to Win2kPro. They all have the exact same hardware and are PXE compliant. The first 10 computers install correctly. How do you install Win2kPro to the rest?
A. Change BIOS settings
B. Add more IP addresses in the DHCP server
C. Make startup disks using RBFG.EXE
29. You install a new CD-ROM. It is not working correctly. You check resources and see that it is not using “Automatic” resource settings. How do you get your CDROM to work?
A. Check “Use Automatic Settings”
30. You want to back up and encrypted file. Your options are to a floppy or to a network share. What do you do?
A. Copy the files to a network share and do nothing else
B. Format the floppy as NTFS and copy it there
C. Copy it to a fat32 network share
31. How do you move the printer spool to another drive?
A. Printer Properties, advanced tab
32. You have a 2 MB Windows Bit Map. You have compression enabled on Drive C:. The file has been compressed to 1 MB. You try to copy the file to a floppy disk but you get the message "insufficient disk space." How can you copy the file to the disk?
A. Compress the bitmap with a 3rd party compression tool then transfer it to the “a” drive.
33. You want to upgrade 150 computers from wks4 to 2000 pro. You create a unattent.txt file by using setup manager. You copy the file to a floppy disk. You then start the installation on a test computer by using the windows 2000 professional CD-ROM. You insert the floppy disk after the computer starts. Although you had set the user interaction level to full unattended mode, u are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input. What should you do?
a. Add a {data} section to aunattend.txt, and set the unattended install Parameter to YES.
b. Add an {Un-attend} section to unattend.txt, and set the OEMP reinstall parameter to Yes.
c. Rename unattend.txt on the floppy disk to winnt.sif
d. Create a \$oem$\$1 folder on the hard disk of the test computer, and copy unattend.txt to the folder.
34. You are the administrator of your company’s network. A user named Peter runs windows 2000 Professional on his portable computer. Peter wants to be able to work at home on files that were created in the office on the company network. Prior to logging off the network and leaving the office, Peter enables offline files. Peter calls you from home and reports that copies of his folders and files on the network are not available on his portable computer. What should you instruct peter to do?
a. Enable file and print sharing. Peter will be able to access his files at home immediately.
b. Synchronize all offline files. Peter will be able to access his files at home immediately.
c. At the office, make all files available offline. Peter will be able to access his files the next time he logs off the network.
d. At the office, create a shortcut to the Offline Files folder. Peter will be able to access his files the next time he logs off the network.
35. Your windows 2000 professional computer has 10-shared folders that are available to other network users. A user reports that he cannot access a shared folder named share A. You want to respond to the user’s problem as quickly as possible by using an administrative tool. However, you cannot remember the server location of Share A. What should you do?
a. Use windows explorer to display the file paths of your shared folders.
b. Use store it in computer management to view local drive properties.
c. Use event viewer in computer management to search for shared folder error messages.
d. Use System tools in computer management ot display the file paths of your shared folders.
36. You are using windows installer to deploy an application to 750 windows 2000 Professional computers on your network. The network includes an organizational unit (OU) named sales. A Group Policy object (GPO) is created for the Sales OU. The software deployment of the application is unsuccessful. During the deployment, some users in the Sales OU report that the installation is aborting with random errors midway through the installation process. The remaining users in the Sales OU report that the software is installing, but is giving them general protection fault errors. What should you do?
a. Repackage and re-deploy the application’s .msi file to the Sales OU.
b. Repackage and re-deploy the application’s .mst file to the Sales OU.
c. Re-deploy the application by using the Group Policy object (GPO for the Sales OU.
d. Restart Windows Installer on all computers in the Sales OU. Then re-deploy the application’s .zap file to the sales OU.
37. Kristin works between 2 offices. From her laptop, she logs into her Boston account using her login “Bost_Eng”. She only has the English version available. When Kristin logs into her Mexico account “Mex_Span”, she only has Spanish language available. Kristin logs in to the Bost_Eng account and needs to use Spanish. She tries to install Spanish but is not able to. You are the network administrator, how to address this problem so that Kristen can use English and Spanish from her Bost_Eng account?
A. Change her settings in the OU to allow Kristin to use Spanish
B. Giver her appropriate permissions to allow her to install the Spanish language option.
38. You are having problems with video during an unattended installation, the screen flickers and blanks out. Place the cross hairs on the line where the problem exists in your unattended.txt file.
(There was a lot more to this question, just can’t remember it) The answer was either BitsperPel or Vrefresh) Read what normal settings should be for each of those using a 640-480 resolution. Make sure you know which one 640 and which is 480
[Display]
BitsPerPel = 8
Vrefresh = 80
Xresolution = 640
Yresolution = 480
39. You want to automate the RIS installation of a syspreped image, what files do you need to copy to the floppy disk?
A. Sysprep.inf, some other stuff.
40. You have a DNS server, Active directory installed, RIS server, and a client computer that meets the net pc specs. The client computer is behind a non bootp compliant router. Drag and drop the appropriate items to make it work.
A. You had to drag the dchp relay agent onto the router and drag a dchp server as well.
To answer this question correctly, you need to know what is required to install via a RIS.
1. Win2k Server with RIS installed
2. DNS server
3. DHCP server
4. Win2k Domain with active directory
5. Client computer that meets net pc specs
6. Ability of the net pc to reach the dchp server.
41. You have configured accessibility options for Tom; this includes sticky keys, filters, ect. Everything is working correctly. Tom leaves his computer and comes back an hour later. None of the accessibility options work anymore. What should you do?
A. In control panel, accessibility options, on the general tab, disable “Turn off accessibility features after idle for xx minutes”
42. You want to change the location of a users roaming profile from c:\documents and settings to a network share \\pdc\users\ how do you do this?
A. On the server configure user properties and place the path as \\pdc\users\%username%
43. A user has a laptop which he uses offline and online. You want to change the users profile to roaming. When you attempt to change the setting. The “change to roaming” option is grayed out. How do you address this problem?
A. In control panel, system, change profile to roaming
B. Have him log back into the network then see if option is not grayed out.
44. RAS question: You dial in using TPC/IP. You see all the PC’s on the local network to the RAS server, but you do not see any of the other networks. What do you do?
A. Use default Gateway on the server.
45. Someone is deleting files and you wish to find out who it is. (Select 2)
A. Enable local group policy object access
B. Select files to audit using explorer
1. A
2. C,D
3. A
4. C,D,E
5. B
6. A
7. C
8. A
9. B
10. A
11. D
12. C
13. A?
14. A
15. A
16. A
17. ?
18. A
19. B?
20. C
21. A,C
22. A
23. A,B
24. D
25. C
26. B
27. A
28. A
29. A
30. A
31. A
32. A
33. C
34. C
35. D
36. ?
37. ?
38. ?
39. A
40. A
41. A
42. A
43. ?
44. A
45. A,B
If you take, give something back!
|
